ITEM / PART | MATERIAL OF CONSTRUCTION |
---|---|
Nozzle | Stainless Steel-304 / 316 / 316L |
Monitor Body | Stainless Steel-304 / 316 / 316L |
Flange (150 LBS, ANSI B 16.5 rating size 150 mm) |
Stainless Steel-304 / 316 / 316L |
Swivel Joints | Stainless Steel-304 / 316 / 316L |
Gear | Stainless Steel-304 / 316 / 316L |
Spindle for worm | Stainless Steel-304 / 316 / 316L |
Hand-wheels for Nozzle, horizontal / vertical movement. |
Stainless Steel-304 / 316 / 316L |
Pick-up tube (3mtr length) | PVC reinforced with high tensile steel wire helix as per ASTM D1785 sch.80. |
Drain Valve | Stainless Steel-304 / 316 / 316L |
Foam strainer (removable type) | Stainless Steel-304 / 316 / 316L |
Foam Inductor | Stainless Steel-304 / 316 / 316L |
Foam Inductor Coupling (63mm) | Stainless Steel-304 / 316 / 316L |
Nuts/bolts at monitor | Stainless Steel-304 / 316 / 316L |
Fixed Flow Monitors -Adjustable Flow Monitors
- UL Listed Monitor and UL Listed Foam Induction Mechanism under UL Standard – 162
- NewAge UL Listed Water cum Foam Monitors offer superior durability in Marine, Chemical, Oil & Gas Sector, Ports, Jetties, Onshore and Offshore Platforms.
- Designed for Fixed Installations where Monitors are required with High Flow Rates and Long Range Straight Streams.
- UL Listed Flanged Inlet Monitors with UL Listed Fixed Flow and Variable Flow Nozzles
- Made out of Stainless Steel, these monitors are fit for optimum performance where environment is highly corrosive
- Stainless Steel Material Grade available are SS 304, SS 316 and SS 316L
- 3 % Foam Induction is through Self Inducting Non-Aspirating Aqua Foam Nozzle with Jet and Fog Movement and optionally using Jet Ratio Controller Pump.
- Metering Valve on the Foam Inducting device for Corresponding Flow and Precise Induction
- Non-Aspirating Aqua Foam Nozzle is very much compatible for Jet-Ratio controller Pump without any modification.
- Selectable Gallonage Nozzle with Multiple Flow Settings capable of adjustment from Straight Stream to 140 Degree Spray Angle
- The Flow setting can be done easily and quickly from the Monitor Nozzle by an ergonomic Wheel Nut by a Single Operator without the use of any Tools and Tackles
- The design of the Nozzle is such that change of Flow from one setting to another can occur during the operation of monitor under pressurized condition without shutting down the monitor or isolating the line.
- Horizontal and Vertical Movement is made with the Self Locking type enclosed Geared Swivel Joints with Worm and Worm Gear using Hand Wheel that ensures smooth and easy movement during ongoing operation of Monitor easily by Single Operator.
- Horizontal Rotation of 360 Degrees and Vertical Traverse of +90 Degrees and -45 Degrees.
- The Monitor is equipped with the Pressure Gauge at the Inlet of the Nozzle and a Drain Valve at the Inlet Flange